Mechatro Store - Jual Motor DC Torsi Besar, Stepper Motor, Motor Servo, Motor Brushless, Solenoid Valve kondisi Baru / Bekas Murah

Motor Servo DF15RSMG

Kategori: Motor Servo | 49 Kali Dilihat
Motor Servo DF15RSMG Reviewed by admin on . This Is Article About Motor Servo DF15RSMG

INTRODUCTION This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the… Selengkapnya »

Rating: 5.0
Harga:Rp 299.000

Order via SMS

+6285648022313

Format SMS : ORDER#NAMA PRODUK#JUMLAH
Pemesanan Juga dapat melalui :
SKU : Servo DF15RSMG
Stok Tersedia
0.1 Kg
19-07-2018
Detail Produk "Motor Servo DF15RSMG"

jual Motor Servo DF15RSMG Murah jual Motor Servo DF15RSMG Murah

INTRODUCTION

This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the robot arm or the joints.The shells of this kit are thickened to make it stable enough for motion system.

The torque of this motor is about 19kg/cm at 7.4v power supply.Using the Arduino servo library, you could drive this servo motor easily. To reduce the consumption of your microcontroller, this servo has a lock function for the pulse detection. So driving it to a target position just requires one PPM controlling signal.

Cable definition
Brown – GND
Red – VCC
Orange – Signal(PPM input wire)

SPECIFICATION

  • Mechanical specification
  • Rotation angle range: 360
  • No-load speed:60/0.16s @7.4v
  • Stall torque:19.3kg.cm7.4v
  • Dynamic torque:15.1kg.cm7.4v
  • Gear:steel,copper mixed gear
  • Assembly method:fastening with double layer 4 screws
  • Equip 2 pairs of shells,2 metal servo horns and 2 servo support
  • Size: 40x40x20 (mm)
  • Electrical specification
  • Working Voltage: 5-7.4v
  • Stall current:3A(@8.5V – Limit test)
  • PPM Voltage:3V-5V
  • PPM Resolution:2us
  • PWM driver frequency:4KHZ
  • Range of PPM positive pulse width:400us-2550us
  • Minimum value of PPM negative pulse width:400us

DOCUMENTS
Servo library arduino.cc/en/Reference/Servo

Cek juga Motor Servo DS04

 
Chat via Whatsapp